Modern Sporting Rifle Evolution
Register Calendar Latest Topics Chat
 
 
 


Reply
  Author   Comment  
WilliamSS159

Member
Registered:
Posts: 26
Reply with quote  #1 
Hey guys I’m talking with Al from NOE bullet molds about making the wolverine a custom mold in 103 grain range with gas check. This bullet will fill chamber and neck. We will need 10 orders to make it happen so 9 to go. Anyone tentatively interested please let me know below. Thank you.

http://noebulletmolds.com/smf/index.php?topic=2291.0
0
Dodcop507

Member
Registered:
Posts: 8
Reply with quote  #2 
I’m interested, 103 grain bullet mold you are darn skippy I’m interested. How many bullets can be molded?
How much are we looking at if we get the 10 interested parties?
0
WilliamSS159

Member
Registered:
Posts: 26
Reply with quote  #3 
This is a bullet mold for casting bullets. Long story short, melt lead, pour in mold drop out bullet. I've made 10s of thousands on some other NOE molds i have. The cost is 79-110.00 once all 10 have signed up they will order the tooling and we will purchase and get the mold in the mail. I've been in a few group buys like this it takes patience unfortunately. 
0
Dodcop507

Member
Registered:
Posts: 8
Reply with quote  #4 
I understand i was asking how many cavities, i am interested in being part of this order.
0
WilliamSS159

Member
Registered:
Posts: 26
Reply with quote  #5 
Good to hear, click the link up above to the NOE forum and that is were you will put down what your wanting. they have 2 cavity through 5 cavity, brass and aluminium. 
0
kf4zht

MSR Enthusiast
Registered:
Posts: 124
Reply with quote  #6 
FYI, looks like 8/10 signed up. Anyone interested may want to get over there soon
0
kdbarker

Avatar / Picture

Moderator
Registered:
Posts: 448
Reply with quote  #7 
Quote:
Originally Posted by kf4zht
FYI, looks like 8/10 signed up. Anyone interested may want to get over there soon


I'm going to check it out today and see if I'm too late to get in on this!
Edited: I just registered with the site, waiting for registration confirmation.

__________________

Firearms Instructor Certification and Metallic Cartridge Reloading Instructor. Background in Gunsmithing/Armorer, and Shooting Range Development and Management.
"Where there is no counsel, the people fall: but in the multitude of counsellors there is safety"...

 

0
kdbarker

Avatar / Picture

Moderator
Registered:
Posts: 448
Reply with quote  #8 
Just received notification and ordered the 2 cavity brass mold (with handles, gas checks and sizer die w/bushing and push rod). I've cast some pistol bullets but this will be my first experience casting rifle bullets... I'll no doubt have lots of questions.
__________________

Firearms Instructor Certification and Metallic Cartridge Reloading Instructor. Background in Gunsmithing/Armorer, and Shooting Range Development and Management.
"Where there is no counsel, the people fall: but in the multitude of counsellors there is safety"...

 

0
dpmsman

Member
Registered:
Posts: 41
Reply with quote  #9 
NOE molds are top notch just keep the temp up a little higher. Brass molds like to be run on the hotter side.
0
kdbarker

Avatar / Picture

Moderator
Registered:
Posts: 448
Reply with quote  #10 
Just received the 2 cavity brass mold order... everything looks awesome!!!

277 103gr bullet mold 02.jpg 

277 103gr bullet mold 01.jpg 


__________________

Firearms Instructor Certification and Metallic Cartridge Reloading Instructor. Background in Gunsmithing/Armorer, and Shooting Range Development and Management.
"Where there is no counsel, the people fall: but in the multitude of counsellors there is safety"...

 

0
JohnathanWhitney

Senior Member
Registered:
Posts: 56
Reply with quote  #11 
Is there any more to but? My guy is taking way to bad long and noe refuses to do any custom orders atm
0
muellerdeal

Member
Registered:
Posts: 48
Reply with quote  #12 
i got my 5 hole alum. block in today really excited! now if i could just finish this shutdown im in and have time off ill be molding and shooting!
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.